fbpx
en English
ar Arabicen Englishfr French

Elektral Walk-Through Metal Detectors s3

Compare
Category:

ECONOMIC WALK THROUGH METAL DETECTOR THRUSCAN® S3

ThruScan s3 is the one of the basic model in our Walk Through Metal Detector range, with still highly effective and sensitive panels.

  • In conformity to CE , Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)
  • Conforms with European Norms NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2008 QMS
  • Electromagnetic Field-EMC conforms to International Health and Safety Norms
  • Detects all threat objects even those hidden with camouflage, concealed and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
  • ThruScan/s3 Multi-Zone – 3 Vertical Detection Zones (Left/Middle/Right)
  • Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
  • 10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 standard pre-set international security program
  • Auto Calibration (Automatically calibrates itself to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
  • Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.
  • No Interference between Zones and No False Alarms
  • Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
  • Gives Alarm to all threat objects detected in different Alarm Zones.
  • Can detect when tested both individually and in combination
  • Green/Red traffic control LEDs allow to enter 30 Persons / Min.
  • Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
  • Metal Density Display by 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
  • Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4×20 Characters LCD Screen
  • Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.
  • Five Digit Incoming Counter (Visible/Invisible)
  • Alarm Counter (Five Digit)
  • IR Pass Sensor On / Off selection
  • Four-digit changeable digital Pin Code
  • Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
  • Reloading the factory default settings by one-touch button
  • Easy programming and monitoring with wide LCD display
  • 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
  • OPTIONAL -Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains
  • No seasonal adjustment requirement thanks to its Digital Electronic System Processing(DSP)
  • Easy to mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
  • IP 20 (IP 65 Optional) Protection Level (EN 60529)
  • Manufactured for 24/7 Continuous Operation
  • 74 cm Net Passage Width and 200 cm Net Passage Height
  • Interference free Operation at Middle Level Sensitivity of 10 cm for stagnate Metals and 200 cm for moving.
  • Audio-Visual alarms are noticeable at a range of 2 meters
  • Micro-Processor Settings do not change when there is an electricity cut-off
  • Strong plastic footers for sturdy placement and durable use.

garuntee en

Technical Features: Package Dimensions (W x L x H):
Ambient Temperature: -20°C to +70°C Box 1: 81 x 235 x 21 cm (65 kg)
Operating voltage: 70 VAC – 270VAC / 50Hz – 60Hz Box 2:25 х 80 х 27 cm (12 kg)
Power: 10W Stand by: 20W(Alarm) Net Weight: 60 Kg
Net Passage:74 x 68 x 200 cm
External 85 x 68 x 220 cm
Gross Weight: 77 Kg

Reviews

There are no reviews yet.

Be the first to review “Elektral Walk-Through Metal Detectors s3”

Your email address will not be published. Required fields are marked *

X