Rayfinder

The Rayfinder is a digital long range antenna that allows you to scan an area similar to a normal dowser. You can determine whether gold, silver, diamonds, copper, water, metal, etc. occur in a certain area.

With the Rayfinder, for example, you can scan a field of about 300 meters in length according to your desired targets whether they are there ?!

The maximum range is about 2100 meters
The maximum depth range of the Rayfinder Long-Range Antenna is approximately 8 meters.

The scan range & depth depends on
A. The type size of the object
B. From Soil Conditions and Mineralization
C.From weather conditions (humidity, drought, etc.)

To make it clear once again, when dry, you will get different results than with very high humidity or damp soil!

The soil conditions are also very important for the depth performance, in heavily mineralized soils you will reach less penetration depth than eg in the sand or forest soils. An object the size of a coin can be located to a depth of about 70cm. For large objects and good soil conditions several meters depth can be achieved.

The Rayfinder is equipped with various programs. You can use the Rayfinder to detect the following: diamonds, gold, silver, copper, bronze, lead, aluminum, water, iron, cavities or underground facilities can also be traced.

However, you can only use one program at a time, eg to search for gold.
For another search for a cavity, they have to scan the area again separately, and so on.

We recommend that you watch the video to understand exactly how this device works and works. The video is English but easy to understand!

The device is very simple and actually self-explanatory in handling. The programming is very easy to operate via the four-button menu and you can immediately track your entries via the menu screen.

The Rayfinder is often used for diamond searches in African countries like Angola and Somalia. In Turkey, Greece, Portugal and other countries, we often use the device to search for partisan gold or other artifacts! Even treasure hunters like to use the Rayfinder for searching in rough terrain or for hidden or buried treasures or family treasures.

This device is usually used when you know that someone has buried something, just does not know exactly where it was buried? But this device is an invaluable help and often leads to success very quickly. This is also very time-saving, especially if it is a very large area of ​​sometimes several hundreds of meters or even kilometers.

The operation of this device is roughly explained.

The Rayfinder control unit is first connected to the transmission rods, then they are inserted into the ground and set to the desired material / object which one seeks.

The device now sends the corresponding set frequencies into the ground. The antennas are connected to the receiving part and only react when the corresponding object responds to the emitted frequencies / waves.

Why is that?
Well that’s pretty easy to explain in principle, each material has a different conductance and is also composed of different atoms, so each material has a different frequency with which it reacts. This makes the Rayfinder use and is therefore so effective. Metal detectors work on a similar principle, since metals can be measured according to the conductance principle.

The Rayfinder has a decisive advantage over a Metal detector, because depending on the set frequency, all unwanted material is completely ignored.

Incidentally, in addition to diamonds, the Rayfinder also reacts to other gems in the Diamonds program!

* It is recommended to use the device outdoors only. Since electronic lines (also Oberlandleitungen), radio frequencies etc. can cause disturbances.

Unfortunately, it can not be ruled out that the device will work perfectly with too many possible sources of interference. Therefore, the best results can only be achieved on fields or landscapes where there are hardly any power lines or other sources of interference!

* Tactile keys and audible signals
* “WCC” signal receiver with target weight check-control, power amplifier and gold plated “L” rods
* The receiver antennas are protected against oxidation, caused by moisture or eg by hand sweat (PH-VALUE!)
* 2 years warranty

Technical data:
* 16-bit processor 40 MIPS Speed ​​- 160 MHz clock
* 32-bit DDS Synthesizer chip to output waveforms
* Digital Frequency Synthesis x 20 PLL Frequency Generator with Automatic Frequency Stabilizer at 0,1 Hz
* Programs for Gold, Silver, Copper, Bronze, Lead, Iron, Aluminum, Diamonds, Water, Cavity and Free Mode
* Manual frequency selection at 1 Hz increments for each mode * User frequency selection is automatically saved
* Output power up to 24 volts peak – peak
* Color LCD, resolution 320 x 240 pixels and 8 backlight levels
* 70 mA battery consumption / 170 mA at full backlight. Permanent battery status indicator
* “APO” – Automatic switching on, in the reason of conduct
* “DGB” – Digital ground leveling to eliminate high mineralization disruptions
* Soil mineral content Scoreboard 000-999 & Symbol
* “RAY Track” – Variable waveform according to the soil type
* “RAY Graph” – real-time waveform animation
* On the screen counter for signal inductance, beep to start scanning when the energy field is established.
* BNC ground probe and main unit in one piece – no cables – compact design
* Unit rotatable by 360 degrees for easy viewing of the screen

* Tactile keys and audible signals
* “WCC” signal receiver with target weight check-control, power amplifier and gold plated “L” rods
* The receiver antennas are protected against oxidation, caused by moisture or eg by hand sweat (PH-VALUE!)
* 2 years warranty